Bore Hole Drill Rig-manufacture,factory,supplier from China
(Total 24 Products for Bore Hole Drill Rig)
Equipped with Yuchai YC6J220 power pack 12/15m³/min Air compressor for hole diameter φ90-115mm and with dry dust collector.JS421 Integrated DTH Surface drill rig with single power pack(only one diesel engine)to drive both screw air compressor and hydraulic system,compared with separated drill rigs,the fuel consumption reduced by 35%and maintenance cost down by 50%.Product Parameters：PowerYuchai YC6J220162 kWHole Depth 20 mDrill Pipe Sizes φ60 mm×3,000 mmHole Dia φ90-115mmDTH Hammer 3.5"RotationTorque(Max.) 1,258 N.mR
Contact Now
ProductProduct Parameters： Hole Depth 30 m Drill Pipe Sizes φ76×3,000 mm Hole Dia φ110-138 mm Hammer 4”/5" Rotation Torque(Max.) 3,200 N.m Rotation Speed 0-100 rpm Working Pressure 0.7-2.5 Mpa Length of Feed Beam 5,645 mm Feed Travel Length 3,660 mm Feed Extension 960 mm Feed Speed 26 m/min Feed Force 20 kN Pull Up Force 45 kN Feed Type Chain &
Contact Now
We have a complete range of powerhead hydraulic drills for water well drilling and other applications that require the use of air or mud cone and down-the-hole hammer drilling processes. Our rigs are powerful and versatile, reaching the required drilling depth in a variety of soil conditions and rock formations.
Contact Now
JS412 drill rig operation platform,tramming components,hydraulic system,feed beam & rotary head are upgraded from the original the functional capability of the drill rig.
Contact Now
Working principle of down-the-hole drilling rig impactor:The compressed gas enters the impactor through the drill pipe, and is then discharged from the drill bit. The discharged exhaust gas is used to discharge ballast.
Contact Now
Product Description:As one of the important components of the entire down-the-hole drilling tool, the down-the-hole impactor is a working device of the down-the-hole drilling rig. The down-the-hole impactor is divided into low-wind pressure down-the-hole impactor, medium-pressure down-the-hole impactor and high-wind pressure down-the-hole impactor. Impactor.It can convert air pressure into impact energy, and simultaneously transfer impact energy and rotational force to the down-the-hole drill bit. The drill bit has fast drilling speed and low air consumption.
Contact Now
Working principle of down-the-hole drilling rig impactor:The compressed gas enters the impactor through the drill pipe, and is then discharged from the drill bit. The discharged exhaust gas is used to discharge ballast.
Contact Now
Product Desctiption:As one of the important components of the entire down-the-hole drilling tool, the down-the-hole impactor is a working device of the down-the-hole drilling rig. The down-the-hole impactor is divided into low-wind pressure down-the-hole impactor, medium-pressure down-the-hole impactor and high-wind pressure down-the-hole impactor. It can convert air pressure into impact energy, and simultaneously transfer impact energy and rotational force tothe down-the-hole drill bit.
Contact Now
Product Description:As one of the important components of the entire down-the-hole drilling tool, the down-the-hole impactor is a working device of the down-the-hole drilling rig. The down-the-hole impactor is divided into low-wind pressure down-the-hole impactor, medium-pressure down-the-hole impactor and high-wind pressure down-the-hole impactor. Impactor.It can convert air pressure into impact energy, and simultaneously transfer impact energy and rotational force to the down-the-hole drill bit. The drill bit has fast drilling speed and low air consumption.
Contact Now
Application fields:1 For mininig,quarry blasting hole borehole drilling2 For water well,depep hole well,oil and gas open hole drilling3 For foundation and piling drilling4 For mininig,quarry blasting hole borehole drillingPartsWeight /kgPartsWeight /kg1 Top Sub42 Kg9 Piston43.5 Kg2 Adjuster Shim0.2 Kg10 Piston Case64.5 Kg3 "O"Ring0.02 Kg11 Retainer Ring1.25 Kg4 Check Valve1.3 Kg12 "O"Ring0.02 Kg5 Spring0.09 Kg13 Guided Sleeve3.35 Kg6 Rubber Buffer0.4 Kg14 Drive Chuck16 Kg7 Valve Sea12.7 Kg15 Drill Bit8&nb
Contact Now
Application For mininig,quarry blasting hole borehole drillingFor water well,depep hole well,oil and gas open hole drillingFor foundation and piling drillingPartsWeight /kgPartsWeight /kg1 Top Sub60 kg9 Retainer Ring 2.76 kg2 "O"Ring0.03 kg10 "O"Ring 0.02 kg3 Check Valve1.5 kg11 Guided Sleeve 5 kg4 Spring0.2 kg12 Drive Chuck 21 kg5 Valve Seat12.8 kg13 Drill Bitk6 Inner Cylinder13.5 kg7 Piston71 kg8Piston Case85 kgTechnical parametersLength(Less bit)Weight Outer diameterConnection
Contact Now
Description:The impactor of a down-the-hole drilling rig is a key component of down-the-hole drilling rig drilling. It is used to provide axial reciprocating rock-breaking impact force to the drill bit in order to cool the drill bit and entrain cuttings. It is also the power fluid for downhole power drilling tools.
Contact Now
Working principle of down-the-hole drilling rig impactor:The rotary motion of the impactor is provided by the rotary head, and the shaft thrust is provided by the propeller and transmitted to the impactor through the drill rod. The card sleeve is mainly used to transmit propulsion force and rotational motion to the drill bit.
Contact Now
SP35AButton qty.pcs*dia.mmWeight(Kg)Head shapeHead Diameter (mm)Shank LengthSplinePort holesButton Type (Optional)Gauge ButtonsFront ButtonsFlat Face90 150 6 2 Domed+Ballistic6*Φ145*Φ124.3 Flat Face95 150 6 2 Domed+Ballistic6*Φ145*Φ124.4 Flat Face100 150 6 2 Domed+Ballistic6*Φ146*Φ124.6 Flat Face108 150 6 2 Domed+Ballistic8*Φ136*Φ124.9 CompanyJS DRILL is a large-scale professional manufacturer of high, medium and low wind pressure down-the-hole drilling rigs and water well drilling ri
Contact Now
Automatic drill pipe handling system with powerful off-road performance for less rig preparation time.Large displacement and high pressure screw air compressor for thorough flushing,to highly increase rock drilling speed and reduce the consumption of drilling tools.Powerful feeding and rotation design for less jamming in complex rock situation.Single operator for labor costs.Product Parameters：Engine YC6J220-T300162kW@2,200 rpmYuchai YC6J220-T300162 kW@2,200 rpm YC6L310-H3002 30 kW@2,000rpmYuchai YC6L310-H300230 kW@2,000 rpmHole Rangeφ90-115 mmφ90-138 mmDrill Pipe Storage7+17+1Drill
Contact Now
The steel track is durable, lasts longer and protects the drill rig.
Contact Now
Performance characteristics of the impactor of the down-the-hole drill:1.
Contact Now
Product Description :The impactor of a down-the-hole drilling rig is a key component of down-the-hole drilling rig drilling.It is also the power fluid for downhole power drilling tools.
Contact Now
Product Product Parameters1NameWater well down-the-hole drilling rig2Applicable hole diameter100-4003Drilling depth260m4Engine power61HP, 4-cylinder diesel engine5Slewing torque5500n-8500N6Slewing speed90-160/h7Lifting force12 tons8Applicable drill rod60-76-89-1029Drill rod length2M10Applicable air compressor18-25bar11Drilling rig weight2.5 tons12Drilling rig size2200×1400×2200The machine is matched with 60 water pumps and can be used for both water and gas.Applicable to: water well drilling, reinforcement hole constructionCompanyProducts and ServicesThe company's product line i
Contact Now
This model is the classic product series of separated drill rigs of JS DRILL,and with full function design of super intensity and high-level configuration,is approved by many users.ProductProduct Parameters： Hole Depth 30 m Drill Pipe Sizes φ76mm×3,000 mm Hole Dia φ110-165 mm DTH Hammer 4"/5” Rotation Torque(Max.) 3,500 N.m Rotation Speed 0-100 rpm Working Pressure 0.7-2.5 Mpa F.A.D 10-20 m³/min Feed Force 20 kN Pu
Contact Now
AdvantageIt has the advantage of high flatness, smooth hole wall, high rigid of drill rod and hammer, independent of high axial thrust, no limit of drilling depth, low cost of devices and easiness to maintain. PartsWeight /kgPartsWeight /kg1 Top Sub 60 kg 9 Retainer Ring2.2 kg2 "O"Ring 0.03 kg 10 "O"Ring0.02 kg3 Check Valve 1.5 kg 11 Drive Chuck27 kg4 Spring 0.2 kg 12 Drill Bit5 Valve Seat 12.8 kg6 Inner Cylinder 13.5 kg7 Piston
Contact Now
Parallel transmission design, independent oil pump, sufficient power, reasonable distribution, unique hydraulic system design,simple maintenance and low costThe operating system is simple and easy to operate, easy to load and unload on the truck.Product Product parameters：Weight (T)11.5 Drill pipe diameter (mm) Ø102 Ø108 Ø114 Hole diameter (mm) 140-350 Drill pipe length (m) 1.5 / 2.0 / 3.0 / 6.0 Drilling depth (m) 500Rig lifting force (T) 26One-time advance length (m) 6.6Rapid rise speed (m/min) 20Walking speed (km/h) 2.5 Fast feeding speed (m/min
Contact Now
Our product is power provided by 85KW diesel engine with high efficiency, large rotary torque.Product Parameters：Weight (T)12 Drill pipe diameter (mm) Ø102 Ø108 Ø114 Hole diameter (mm) 140-350 Drill pipe length (m) 1.5 / 2.0 / 3.0 / 6.0 Drilling depth (m) 580 Rig lifting force (T) 28One-time advance length (m) 6.6Rapid rise speed (m/min) 20Walking speed (km/h) 2.5 Fast feeding speed (m/min) 40Using air pressure (MPA) 1.7 - 3.5 Swing torque (N.m) 8500 - 11000 Air consumption (m³/min) 17 - 42 Dimension (mm) 6200x2200x2650&n
Contact Now
The impactor of a down-the-hole drill is a key component of the drilling process of a down-the-hole drill. It is used to provide axial reciprocating rock-breaking impact force to the drill bit in order to cool the drill bit and carry rock cuttings, etc. It is also the power fluid of the bottom hole power drill tool.Working principle of the impactor of a down-the-hole drill:The compressed gas enters the impactor through the drill pipe and is then discharged from the drill bit.
Contact Now
Relate News
Drilling rig is a complex machine, which consists of machines, units and mechanisms. A drilling rig is a mechanical device that drives drilling tools to drill underground to obtain physical geological data during exploration or development of mineral resources (including solid minerals, liquid minerals, gas minerals, etc.). Also called drilling machine. The main function is to drive the drilling tool to break the rock at the bottom of the hole, and to lower or lift the drilling tool in the hole. It can be used to drill rock cores, ore cores, cuttings, gaseous samples, liquid samples, etc.
If you need a drill rig for various purposes such as drilling a well to obtain natural resources (water, oil, geothermal energy, etc.) building a foundation, drilling holes in a mine, taking samples from the ground.It is necessary to first determine the purpose of the drilling rig and what kind of terrain it will mainly operate on. Depending on the terrain, you can choose different types of drilling rigs: rotary drilling rigs, impact drilling rigs, down-the-hole drilling rigs, top hammer drilling rigs (with high hammer), etc.
A customer from Puerto Rico in the United States asked our company to customize a 200-meter crawler water well drilling rig with diesel power generation/61kw.First, we will draw a rough model according to the customer's requirements, and then the designer will make a prototype based on the graphics. Now it has been made for the customer.
Zoucheng Jusheng Mining Machinery Co., Ltd. (Shandong) was established in 2 0 1 8. The company's annual sales are more than 1 5 million US dollars. Before the establishment of the company, we have 1 5 years of experience in equipment sales and service. As one of the excellent authorized agents of ZEGA brand mining machinery, we supply ZEGA brand mining rigs and air compressors to global customers. At present, JS Drill has reached long-term cooperation with customers in more than 5 0 countries around the world.
The factory has become busy recently. As the number of customers gradually increases, so do the orders. However, we will still strictly control product quality so that customers can rest assured. The service quality will also increase accordingly.
For the construction machinery industry, its development mainly has the following three characteristics:1. Industry development is closely related to national macroeconomic developmentFor the construction machinery industry, the development of the industry is closely related to the development of downstream demand markets. The development of downstream industries such as the real estate industry, infrastructure industry, power industry, and coal industry has a high impact on the growth of demand for various types of construction machinery and equipment. Relevance.
1. What is the warranty of our machine?Our main machine enjoys a 1 year warranty(except for the hammer), during this time all accessories broken can be changed for a new one.And we provide videos for machine install and operation.2. What is your terms of packing?Generally, we use standard exported wooden case for LCL goods, and fixed well for FCL goods.
Visiting a construction site abroad1 Visiting processSafety training:Before entering the construction site, I received a safety training. The training content may include safety regulations of the construction site, emergency response measures, correct use of personal protective equipment, etc.Listen carefully to the safety training, comply with the safety regulations of the construction site, and ensure your own safety.2 Site tour:The site staff will lead the tour.
What is your terms of payment? T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
1. What is your terms of delivery?EXW, FOB, CFR, CIF.We have a very good cooperation in shipping logistics, and the price is low.Not only our product price is advantageous, but also our logistics price. 2. How about your delivery time?Generally, it will take 7-10 working days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. We have the goods in stock and they will be shipped from the factory within three days.
