Drill Machine Hammer-manufacture,factory,supplier from China
(Total 24 Products for Drill Machine Hammer)
ProductProduct Parameters： Hole Depth 30 m Drill Pipe Sizes φ76×3,000 mm Hole Dia φ110-138 mm Hammer 4”/5" Rotation Torque(Max.) 3,200 N.m Rotation Speed 0-100 rpm Working Pressure 0.7-2.5 Mpa Length of Feed Beam 5,645 mm Feed Travel Length 3,660 mm Feed Extension 960 mm Feed Speed 26 m/min Feed Force 20 kN Pull Up Force 45 kN Feed Type Chain &
Contact Now
Application This machine adopts high-torque hydraulic motor power head and brand diesel oil, and the hydraulic control system adopts large-diameter hydraulic cylinder.
Contact Now
Equipped with Yuchai YC6J220 power pack 12/15m³/min Air compressor for hole diameter φ90-115mm and with dry dust collector.JS421 Integrated DTH Surface drill rig with single power pack(only one diesel engine)to drive both screw air compressor and hydraulic system,compared with separated drill rigs,the fuel consumption reduced by 35%and maintenance cost down by 50%.Product Parameters：PowerYuchai YC6J220162 kWHole Depth 20 mDrill Pipe Sizes φ60 mm×3,000 mmHole Dia φ90-115mmDTH Hammer 3.5"RotationTorque(Max.) 1,258 N.mR
Contact Now
AdvantageIt has the advantage of high flatness, smooth hole wall, high rigid of drill rod and hammer, independent of high axial thrust, no limit of drilling depth, low cost of devices and easiness to maintain. PartsWeight /kgPartsWeight /kg1 Top Sub 60 kg 9 Retainer Ring2.2 kg2 "O"Ring 0.03 kg 10 "O"Ring0.02 kg3 Check Valve 1.5 kg 11 Drive Chuck27 kg4 Spring 0.2 kg 12 Drill Bit5 Valve Seat 12.8 kg6 Inner Cylinder 13.5 kg7 Piston
Contact Now
Effectively prevent the impact of a harshdust environment on the engine.The precision filter layerof the main air filter filters out the remaining dust to ensure that the machine does not wear out;the safety filter element enables the machine to performairfilter maintenance without stopping to ensure the safe peration of the machine.parameterModel40SCG-740SCY-740CKY-8China IV engine(standard)Xichai/36.8 kWDiesel tank volume65 L65 L50 LAir EndSingle Stage CompressionRated FAD4.5 m³/min4.5 m3/mir5 m3/minRated Pressure7 bar7 bar8 barWeight750 kg860 kg730 kgTypeSKID2 wheelAir compressor
Contact Now
We have a complete range of powerhead hydraulic drills for water well drilling and other applications that require the use of air or mud cone and down-the-hole hammer drilling processes. Our rigs are powerful and versatile, reaching the required drilling depth in a variety of soil conditions and rock formations.
Contact Now
Description:The machine comes with a mud dyeing pump to make the work easier and save user costs; The overall steel structure is thickened with steel plates to increase the stability of the machine and make it more durable.
Contact Now
Product Parameters：Overall weight (T)9.2Dimension(mm)5150*2100*2150Drilling diameter (mm)60-110Drilling depth (m)1000Traveling speed (km/h)2.5Climbing ability(max）30°Mud pump modelBW160-10Drilling angle(°)45°-90°Drill pipe length(m)1.5Main machine power (kw)132kwLifting force(T)14Slewing speed(rpm)0-1200Company:The company lies in rencheng city shandong jining province ,with workshop space of 1000 m2 and more than 30 employees.The transportation is very convenient.
Contact Now
The New Diamond DTH hammerare designed with advanced drilling theory which are able to deliver energy better and drill more quickly with lower air consumption.With finest steel and advanced manufacturing techniques,the hammer maintains stable performance and long service life,also easy to assemble and repair.PartsWeight /kgPartsWeight /kg1 Top Sub4.5 Kg9 Guided Sleeve0.9 Kg2 "O"Ring0.01 Kg10 Retainer Ring0.2 kg3 Check Valve0.13 Kg11 "O"Ring0.01 Kg4 Spring0.02 Kg12 Drive Chuck2.5 kg5 Valve Seat0.76 Kg13 Drill Bit6 Inner
Contact Now
This small drilling machine can be installed in less than ten minutes,can be used at indoor and outdoor site. The well pipe is fully enclosed, shallow layer has no leakage, can ensure the health and safety of drinking water.Product Product parametersname Small hydraulic water well drilling rigmodel JSL-260 power Diesel engine power 61HP Drilling diameter 15-35cmdrill pipe diameter 60mm/80mm/90mmbit size Multiple caliber alloy drill bits availabledepth 250 m Weight610kg dimensions 2.4m*1.9m*1.4m accessoryCan use air compressor and down-hole hammer soil soil layer, quicksand layer and
Contact Now
Performance characteristics of the impactor of the down-the-hole drill:1.
Contact Now
our product is integrated automation equipment,all terrain moves by itself and adopt consummate design, long service life.Product Parameters：Weight (T)17.6 Drill pipe diameter (mm) Ø114 Ø117 Hole diameter (mm) 500 Drill pipe length (m) 3.0 / 6.0 Drilling depth (m) 1000Rig lifting force (T) 52One-time advance length (m) 7Rapid rise speed (m/min) 32Walking speed (km/h) 2.3 Fast feeding speed (m/min) 60Equipped capacitor (kw)194Swing torque (N.m) 10500 - 21000 Hoisting force of winch (T) 4.2 Dimension (mm) 7450x2250x2900 Swing speed (rpm) &n
Contact Now
Button qty.pcs*dia.mmHead shapeHead Diameter (mm)Shank LengthSplinePort holesButton Type (Optional)Gauge ButtonsFront Buttonsconcave face 154 231 12 2 Domed8*Φ184*Φ16+4*Φ15Flat Face 165 231 12 2 Domed+Ballistic8*Φ188*Φ16concave face 171 231 12 2 Domed8*Φ186*Φ16+4*Φ15concave face 178 231 12 2 Domed8*Φ186*Φ16+5*Φ15concave face 190 231 12 3 Domed9*Φ186*Φ16+5*Φ15concave face 203 231 12 2 Domed10*Φ188*Φ16+6*Φ15Company Our company is a large-scal
Contact Now
This model is the classic product series of separated drill rigs of JS DRILL,and with full function design of super intensity and high-level configuration,is approved by many users.ProductProduct Parameters： Hole Depth 30 m Drill Pipe Sizes φ76mm×3,000 mm Hole Dia φ110-165 mm DTH Hammer 4"/5” Rotation Torque(Max.) 3,500 N.m Rotation Speed 0-100 rpm Working Pressure 0.7-2.5 Mpa F.A.D 10-20 m³/min Feed Force 20 kN Pu
Contact Now
Button qty.pcs*dia.mmWeight(Kg)Head shapeHead Diameter (mm)Shank LengthSplinePort holesButton Type (Optional)Gauge ButtonsFront Buttonsconvex face 140 185 10 2 Domed+Ballistic7*Φ184*Φ15+3*Φ1413.2 Flat Face 146 185 10 2 Domed8*Φ188*Φ1413.9 Flat Face 152 185 10 2 Domed+Ballistic8*Φ188*Φ1414.3 Flat Face 165 185 10 2 Domed+Ballistic8*Φ186*Φ1616.3 concave face 178 185 10 2 Domed8*Φ185*Φ1417.8 CompanyOur products are sold to Thailand, Chile, Cana
Contact Now
The impactor of a down-the-hole drill is a key component of the drilling process of a down-the-hole drill. It is used to provide axial reciprocating rock-breaking impact force to the drill bit in order to cool the drill bit and carry rock cuttings, etc. It is also the power fluid of the bottom hole power drill tool.Working principle of the impactor of a down-the-hole drill:The compressed gas enters the impactor through the drill pipe and is then discharged from the drill bit.
Contact Now
Working principle of down-the-hole drilling rig impactor:The compressed gas enters the impactor through the drill pipe, and is then discharged from the drill bit. The discharged exhaust gas is used to discharge ballast.
Contact Now
JS412 drill rig operation platform,tramming components,hydraulic system,feed beam & rotary head are upgraded from the original the functional capability of the drill rig.
Contact Now
Working principle of down-the-hole drilling rig impactor:The rotary motion of the impactor is provided by the rotary head, and the shaft thrust is provided by the propeller and transmitted to the impactor through the drill rod. The card sleeve is mainly used to transmit propulsion force and rotational motion to the drill bit.
Contact Now
Working principle of down-the-hole drilling rig impactor:The compressed gas enters the impactor through the drill pipe, and is then discharged from the drill bit. The discharged exhaust gas is used to discharge ballast.
Contact Now
SP35AButton qty.pcs*dia.mmWeight(Kg)Head shapeHead Diameter (mm)Shank LengthSplinePort holesButton Type (Optional)Gauge ButtonsFront ButtonsFlat Face90 150 6 2 Domed+Ballistic6*Φ145*Φ124.3 Flat Face95 150 6 2 Domed+Ballistic6*Φ145*Φ124.4 Flat Face100 150 6 2 Domed+Ballistic6*Φ146*Φ124.6 Flat Face108 150 6 2 Domed+Ballistic8*Φ136*Φ124.9 CompanyJS DRILL is a large-scale professional manufacturer of high, medium and low wind pressure down-the-hole drilling rigs and water well drilling ri
Contact Now
This machine adopts big torque hydraulic motor for power head and brand diesel, big diameter hydraulic cylinders for the hydraulic control system.
Contact Now
Button qty.pcs*dia.mmHead shapeHead Diameter (mm)Shank LengthSplinePort holesButton Type (Optional)Gauge ButtonsFront Buttonsconcave face190 220 10 3 Domed9*Φ186*Φ16+5*Φ15concave face195 220 10 3 Domed9*Φ186*Φ16+5*Φ15concave face203 220 10 2 Domed10*Φ188*Φ16+6*Φ15CompanyAbout Us, since its inception, has maintained the culture of innovation.
Contact Now
Constant Pressure Drilling SystemThe industry's unique constant pressure drilling system can effectively balance the weight of the drill string and accurately control the weight on bit, so that the drill can better adapt to the complex formation environment and the requirements of deep hole drilling technology.Electric Hydraulic Central Control SystemThe manual console realizes a power operation and drilling operation in a centralized manner, and fully monitors the machine status facilitate operation and fault diagnosis.
Contact Now
Relate News
1. What is the warranty of our machine?Our main machine enjoys a 1 year warranty(except for the hammer), during this time all accessories broken can be changed for a new one.And we provide videos for machine install and operation.2. What is your terms of packing?Generally, we use standard exported wooden case for LCL goods, and fixed well for FCL goods.
Drilling rig is a complex machine, which consists of machines, units and mechanisms. A drilling rig is a mechanical device that drives drilling tools to drill underground to obtain physical geological data during exploration or development of mineral resources (including solid minerals, liquid minerals, gas minerals, etc.). Also called drilling machine. The main function is to drive the drilling tool to break the rock at the bottom of the hole, and to lower or lift the drilling tool in the hole. It can be used to drill rock cores, ore cores, cuttings, gaseous samples, liquid samples, etc.
If you need a drill rig for various purposes such as drilling a well to obtain natural resources (water, oil, geothermal energy, etc.) building a foundation, drilling holes in a mine, taking samples from the ground.It is necessary to first determine the purpose of the drilling rig and what kind of terrain it will mainly operate on. Depending on the terrain, you can choose different types of drilling rigs: rotary drilling rigs, impact drilling rigs, down-the-hole drilling rigs, top hammer drilling rigs (with high hammer), etc.
Zoucheng Jusheng Mining Machinery Co., Ltd. (Shandong) was established in 2 0 1 8. The company's annual sales are more than 1 5 million US dollars. Before the establishment of the company, we have 1 5 years of experience in equipment sales and service. As one of the excellent authorized agents of ZEGA brand mining machinery, we supply ZEGA brand mining rigs and air compressors to global customers. At present, JS Drill has reached long-term cooperation with customers in more than 5 0 countries around the world.
1. What is your terms of delivery?EXW, FOB, CFR, CIF.We have a very good cooperation in shipping logistics, and the price is low.Not only our product price is advantageous, but also our logistics price. 2. How about your delivery time?Generally, it will take 7-10 working days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. We have the goods in stock and they will be shipped from the factory within three days.
A customer from Puerto Rico in the United States asked our company to customize a 200-meter crawler water well drilling rig with diesel power generation/61kw.First, we will draw a rough model according to the customer's requirements, and then the designer will make a prototype based on the graphics. Now it has been made for the customer.
The factory has become busy recently. As the number of customers gradually increases, so do the orders. However, we will still strictly control product quality so that customers can rest assured. The service quality will also increase accordingly.
Visiting a construction site abroad1 Visiting processSafety training:Before entering the construction site, I received a safety training. The training content may include safety regulations of the construction site, emergency response measures, correct use of personal protective equipment, etc.Listen carefully to the safety training, comply with the safety regulations of the construction site, and ensure your own safety.2 Site tour:The site staff will lead the tour.
For the construction machinery industry, its development mainly has the following three characteristics:1. Industry development is closely related to national macroeconomic developmentFor the construction machinery industry, the development of the industry is closely related to the development of downstream demand markets. The development of downstream industries such as the real estate industry, infrastructure industry, power industry, and coal industry has a high impact on the growth of demand for various types of construction machinery and equipment. Relevance.
What is your terms of payment? T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
