Dth Hammer For Blast Hole Drill Ore Mine-manufacture,factory,supplier from China

(Total 24 Products for Dth Hammer For Blast Hole Drill Ore Mine)
ProductProduct Parameters:  Hole Depth  30 m  Drill Pipe Sizes  φ76×3,000 mm  Hole Dia  φ110-138 mm Hammer  4”/5"  Rotation Torque(Max.)  3,200 N.m  Rotation Speed  0-100 rpm  Working Pressure  0.7-2.5 Mpa  Length of Feed Beam  5,645 mm  Feed Travel Length  3,660 mm  Feed Extension  960 mm  Feed Speed  26 m/min  Feed Force  20 kN  Pull Up Force  45 kN  Feed Type    Chain &
  Contact Now
Equipped with Yuchai YC6J220 power pack 12/15m³/min Air compressor for hole diameter φ90-115mm and with dry dust collector.JS421 Integrated DTH Surface drill rig with single power pack(only one diesel engine)to drive both screw air compressor and hydraulic system,compared with separated drill rigs,the fuel consumption reduced by 35%and maintenance cost down by 50%.Product Parameters:PowerYuchai    YC6J220162 kWHole Depth  20 mDrill Pipe Sizes  φ60 mm×3,000 mmHole Dia  φ90-115mmDTH Hammer  3.5"RotationTorque(Max.)  1,258 N.mR
  Contact Now
ApplicationThey are widely used for mine, quarry, road construction for the drilling and blasting work, water well drilling, slope protection, anchoring, etc. PartsWeight /kgPartsWeight /kg1 Top Sub 8.1 Kg 9 Guided Sleeve1.84 Kg2 "O"Ring0.01 Kg 10 Retainer Ring0.3 Kg3 Check Valve 0.3 Kg 11 "O"Ring0.01 Kg4 Spring0.04 Kg 12 Drive Chuck3.9 Kg5 Valve Seat1.5 Kg 13 Drill Bit6 Inner Cylinder2.1 Kg7 Piston8.4 Kg8 Piston Case15 KgTechnical parametersLength(Less bit)Weight&n
  Contact Now
Performance characteristics of the impactor of the down-the-hole drill:1.
  Contact Now
Application1.Mining and Quarrying:widely used in mining and quarrying applications for drilling blast holes, extracting minerals, and breaking up rock formations. 2.Water Well Drilling: utilized in water well drilling operations to penetrate hard rock formations and create water supply boreholes.
  Contact Now
Application fields:1 For mininig,quarry blasting hole borehole drilling2 For water well,depep hole well,oil and gas open hole drilling3 For foundation and piling drilling4 For mininig,quarry blasting hole borehole drillingPartsWeight /kgPartsWeight /kg1 Top Sub42 Kg9 Piston43.5 Kg2 Adjuster Shim0.2 Kg10 Piston Case64.5 Kg3 "O"Ring0.02 Kg11 Retainer Ring1.25 Kg4 Check Valve1.3 Kg12 "O"Ring0.02 Kg5 Spring0.09 Kg13 Guided Sleeve3.35 Kg6 Rubber Buffer0.4 Kg14 Drive Chuck16 Kg7 Valve Sea12.7 Kg15 Drill Bit8&nb
  Contact Now
The impactor of a down-the-hole drill is a key component of the drilling process of a down-the-hole drill. It is used to provide axial reciprocating rock-breaking impact force to the drill bit in order to cool the drill bit and carry rock cuttings, etc. It is also the power fluid of the bottom hole power drill tool.Working principle of the impactor of a down-the-hole drill:The compressed gas enters the impactor through the drill pipe and is then discharged from the drill bit.
  Contact Now
Product Description:As one of the important components of the entire down-the-hole drilling tool, the down-the-hole impactor is a working device of the down-the-hole drilling rig. The down-the-hole impactor is divided into low-wind pressure down-the-hole impactor, medium-pressure down-the-hole impactor and high-wind pressure down-the-hole impactor. Impactor.It can convert air pressure into impact energy, and simultaneously transfer impact energy and rotational force to the down-the-hole drill bit. The drill bit has fast drilling speed and low air consumption.
  Contact Now
We have a complete range of powerhead hydraulic drills for water well drilling and other applications that require the use of air or mud cone and down-the-hole hammer drilling processes. Our rigs are powerful and versatile, reaching the required drilling depth in a variety of soil conditions and rock formations.
  Contact Now
Product Description:As one of the important components of the entire down-the-hole drilling tool, the down-the-hole impactor is a working device of the down-the-hole drilling rig. The down-the-hole impactor is divided into low-wind pressure down-the-hole impactor, medium-pressure down-the-hole impactor and high-wind pressure down-the-hole impactor. Impactor.It can convert air pressure into impact energy, and simultaneously transfer impact energy and rotational force to the down-the-hole drill bit. The drill bit has fast drilling speed and low air consumption.
  Contact Now
Description:The impactor of a down-the-hole drilling rig is a key component of down-the-hole drilling rig drilling. It is used to provide axial reciprocating rock-breaking impact force to the drill bit in order to cool the drill bit and entrain cuttings. It is also the power fluid for downhole power drilling tools.
  Contact Now
AdvantageIt has the advantage of high flatness, smooth hole wall, high rigid of drill rod and hammer, independent of high axial thrust, no limit of drilling depth, low cost of devices and easiness to maintain. PartsWeight /kgPartsWeight /kg1 Top Sub  60 kg  9   Retainer Ring2.2 kg2 "O"Ring  0.03 kg  10   "O"Ring0.02 kg3 Check Valve  1.5 kg  11   Drive Chuck27 kg4 Spring  0.2 kg  12   Drill Bit5 Valve Seat  12.8 kg6 Inner Cylinder  13.5 kg7 Piston
  Contact Now
Product Desctiption:As one of the important components of the entire down-the-hole drilling tool, the down-the-hole impactor is a working device of the down-the-hole drilling rig. The down-the-hole impactor is divided into low-wind pressure down-the-hole impactor, medium-pressure down-the-hole impactor and high-wind pressure down-the-hole impactor. It can convert air pressure into impact energy, and simultaneously transfer impact energy and rotational force tothe down-the-hole drill bit.
  Contact Now
This model is the classic product series of separated drill rigs of JS DRILL,and with full function design of super intensity and high-level configuration,is approved by many users.ProductProduct Parameters:  Hole Depth  30 m  Drill Pipe Sizes  φ76mm×3,000 mm  Hole Dia  φ110-165 mm  DTH Hammer    4"/5”  Rotation Torque(Max.)  3,500 N.m  Rotation Speed  0-100 rpm  Working Pressure  0.7-2.5 Mpa  F.A.D  10-20  m³/min  Feed Force  20 kN  Pu
  Contact Now
Working principle of down-the-hole drilling rig impactor:The compressed gas enters the impactor through the drill pipe, and is then discharged from the drill bit. The discharged exhaust gas is used to discharge ballast.
  Contact Now
Down The Hole DrillingJS Drill DTH drilling tools with high, medium and low air pressure, symmetric drilling tools, eccentric drilling tools, standardized API system casing tube, button bit, bit shank & adaptor of which are fit for hydraulic drilling equipment. Our firm DTH drilling tools are the corollary equipment which match with the products from well-known manufacturers, The equipment are widely used in earthwork projects, minerals explorations, well-digging projects and foundation constructions etc.Parts Description Weight/KgPart Number1Top Sub  59.00CSD10-012O-Ri
  Contact Now
Down The Hole DrillingJS Drill DTH drilling tools with high, medium and low air pressure, symmetric drilling tools, eccentric drilling tools, standardized API system casing tube, button bit, bit shank & adaptor of which are fit for hydraulic drilling equipment. Our firm DTH drilling tools are the corollary equipment which match with the products from well-known manufacturers. The equipment are widely used in earthwork projects, minerals explorations, well-digging projects and foundation constructions etc.Parts Description Weight/KgPart Number1Top Sub  41.0CD85
  Contact Now
Product Description :The impactor of a down-the-hole drilling rig is a key component of down-the-hole drilling rig drilling.It is also the power fluid for downhole power drilling tools.
  Contact Now
Working principle of down-the-hole drilling rig impactor:The compressed gas enters the impactor through the drill pipe, and is then discharged from the drill bit. The discharged exhaust gas is used to discharge ballast.
  Contact Now
Working principle of down-the-hole drilling rig impactor:The rotary motion of the impactor is provided by the rotary head, and the shaft thrust is provided by the propeller and transmitted to the impactor through the drill rod. The card sleeve is mainly used to transmit propulsion force and rotational motion to the drill bit.
  Contact Now
Application For mininig,quarry blasting hole borehole drillingFor water well,depep hole well,oil and gas open hole drillingFor foundation and piling drillingPartsWeight /kgPartsWeight /kg1 Top Sub60 kg9 Retainer Ring 2.76 kg2 "O"Ring0.03 kg10 "O"Ring 0.02 kg3 Check Valve1.5 kg11 Guided Sleeve 5  kg4 Spring0.2 kg12 Drive Chuck 21 kg5 Valve Seat12.8 kg13 Drill Bitk6 Inner Cylinder13.5 kg7 Piston71 kg8Piston Case85 kgTechnical parametersLength(Less bit)Weight Outer diameterConnection
  Contact Now
Powerful two-speed hydraulic tramming mechanism with excellent off-road performance.Bigger and stronger designed rotation unit for smooth high torque output and less drill tool jamming.Two stage dry dust collector for friendly environment and higher production efficiency.Integrated design(air compressor on board)for better long-distance fleet management.Product Parameters:EngineYuchai YC6A260L 191 kWHole Depth20 mDrill Pipe Sizesφ76×3,000 mmHole Diaφ90-138 mmDTH Hammer4”Rotation Torque(Max.)2,500 N.mRotation Speed0-100 rpmWorking Pressure17 barF.A.D16m³/minTramming Speed (Max.)3
  Contact Now
The New Diamond DTH hammerare designed with advanced drilling theory which are able to deliver energy better and drill more quickly with lower air consumption.With finest steel and advanced manufacturing techniques,the hammer maintains stable performance and long service life,also easy to assemble and repair.PartsWeight /kgPartsWeight /kg1 Top Sub4.5 Kg9 Guided Sleeve0.9 Kg2 "O"Ring0.01 Kg10 Retainer Ring0.2 kg3 Check Valve0.13 Kg11 "O"Ring0.01 Kg4 Spring0.02 Kg12 Drive Chuck2.5 kg5 Valve Seat0.76 Kg13 Drill Bit6 Inner
  Contact Now
Product Description :Middle-Low Air Pressure DTH HammerCBR1, CBR2 and CBR3 series DTH Hammers are designed to operate efficiently at low air pressures and medium air pressures, using BR series bits.Parts Description Weight/KgPart Number1Top Sub                          2.6CBR2-012Check Valve                      0.1CBR2-023Spring&nbs
  Contact Now
Relate News
If you need a drill rig for various purposes such as drilling a well to obtain natural resources (water, oil, geothermal energy, etc.) building a foundation, drilling holes in a mine, taking samples from the ground.It is necessary to first determine the purpose of the drilling rig and what kind of terrain it will mainly operate on. Depending on the terrain, you can choose different types of drilling rigs: rotary drilling rigs, impact drilling rigs, down-the-hole drilling rigs, top hammer drilling rigs (with high hammer), etc.
Drilling rig is a complex machine, which consists of machines, units and mechanisms. A drilling rig is a mechanical device that drives drilling tools to drill underground to obtain physical geological data during exploration or development of mineral resources (including solid minerals, liquid minerals, gas minerals, etc.). Also called drilling machine. The main function is to drive the drilling tool to break the rock at the bottom of the hole, and to lower or lift the drilling tool in the hole. It can be used to drill rock cores, ore cores, cuttings, gaseous samples, liquid samples, etc.
1.  What is the warranty of our machine?Our main machine enjoys a 1 year warranty(except for the hammer), during this time all accessories broken can be changed for a new one.And we provide videos for machine install and operation.2. What is your terms of packing?Generally, we use standard exported wooden case for LCL goods, and fixed well for FCL goods.  
A customer from Puerto Rico in the United States asked our company to customize a 200-meter crawler water well drilling rig with diesel power generation/61kw.First, we will draw a rough model according to the customer's requirements, and then the designer will make a prototype based on the graphics. Now it has been made for the customer.
For the construction machinery industry, its development mainly has the following three characteristics:1. Industry development is closely related to national macroeconomic developmentFor the construction machinery industry, the development of the industry is closely related to the development of downstream demand markets. The development of downstream industries such as the real estate industry, infrastructure industry, power industry, and coal industry has a high impact on the growth of demand for various types of construction machinery and equipment. Relevance.
Zoucheng Jusheng Mining Machinery Co., Ltd. (Shandong) was established in 2 0 1 8. The company's annual sales are more than 1 5 million US dollars. Before the establishment of the company, we have 1 5 years of experience in equipment sales and service. As one of the excellent authorized agents of  ZEGA  brand mining machinery, we supply  ZEGA  brand mining rigs and air compressors to global customers.  At present, JS Drill has reached long-term cooperation with customers in more than 5 0 countries around the world.
The factory has become busy recently. As the number of customers gradually increases, so do the orders. However, we will still strictly control product quality so that customers can rest assured. The service quality will also increase accordingly.
What is your terms of payment? T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.  
1. What is your terms of delivery?EXW, FOB, CFR, CIF.We have a very good cooperation in shipping logistics, and the price is low.Not only our product price is advantageous, but also our logistics price. 2. How about your delivery time?Generally, it will take 7-10 working days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. We have the goods in stock and they will be shipped from the factory within three days.
Visiting a construction site abroad1 Visiting processSafety training:Before entering the construction site, I received a safety training. The training content may include safety regulations of the construction site, emergency response measures, correct use of personal protective equipment, etc.Listen carefully to the safety training, comply with the safety regulations of the construction site, and ensure your own safety.2 Site tour:The site staff will lead the tour.