JSFD-1200-manufacture,factory,supplier from China
(Total 24 Products for JSFD-1200)
Advantage1 New designed protected cooler for higher efficiency and better safety protection. Full body sound absorbent cotton and rear car silencer designed to make operate noise reduce 40% less than normal products.2 Large stand-alone capacity, no clearance volume, reasonable structure and ideal force balance, long lifeof the host, easy maintenance and few wearing parts.ParameterLUY110-10LUY110-12LUY125-7LUY170-17LUY215-12LUY235-9LUY180-19LUY215-21Working pressure,bar(psi)10(150)12(175)7 (100)17(250)12 (175)8.6(125)19(275)21(305)Flow,I/s|cfm|m3/min180|385|11180|385|11205
Contact Now
Our product has large heat exchange area cooler with high cooling efficiency and adapt to wider ambient temperature and prolong life.55 SFeT-755：Electric motor power 55kW S：Screw F： Air cool-7：Rated pressure 7bar e：Various frequency T：Two-stage compression 55 SFeT-7ParameterElectric motor powerDischarge air volume FADWork pressure55-132 kW4.7-27.0 m³/min7 barModelElectricmotor powerAir dischargecapacity FADRated speedWeightDimensions(LxWxH)Air dischargevalve size55SFeT-755 kW4.7-11.78 m³/min1500 RPM1650 kg2160×1310×16
Contact Now
37 SLeT-20 37：Electric motor power 37kW S：Screw L：Laser -20：Rated pressure 20bar e：Various frequency T：Two-stage compression 37 SLeT-20ParameterElectric motor powerDischarge air volume FADWork pressure22-37 kW2.2-3.7 m³/min20 barModelElectricmotor powerAir dischargecapacity FADRated speedWeightDimensions(LxWxH)Air dischargevalve size22SLeT-2022 kW0.88-2.2 m³/min2600 RPM620 kg1495×900 ×1240 mmR1-1/4"37SLeT-2037 kW1.48-3.7 m³/min3000 RPM980 kg1735×1045×1345 mmR1-1/2&q
Contact Now
Optimized rotor structure air end, lower noise, higher efficiency, longer life. Integrated air intake system, effectively prevent lubricating oil spill, ensure low load start, reduce power consumption. Simple and accurate control system ensures safe operation.What is 15 SF-8 ?15：15kW / Electric motor power 15kW S： Screw F： Air cool -8：8bar / Rated pressure 8bar Have e：Power frequency No T： Single-stage compression15 SF-8 ParameterElectric motor powerDischarge air volume FADWork pressure7.5-37 kW1.0-6.1 m³
Contact Now
There is no unbalanced inertial force, it can operate smoothly at high speed, and can achieve foundationless operation.
Contact Now
There is no unbalanced inertial force, it can operate smoothly at high speed, and can achieve foundationless operation.
Contact Now
In order to prevent dust pollution during perforation and rock drilling operations, the main components of the product also use a special computer-controlled heat treatment process to facilitate the addition of a small amount of high-pressure water to the compressed air for wet rock drilling to protect the health of the operator.Parts Description Weight/KgPart Number1Top Sub 59.00CN100-012O-Ring of Top Sub0.03CN100-023Breakout Ring of Top Sub0.40CN100-034Check Valve &n
Contact Now
PartsWeight /kgPart NoPartsWeight /kg1Top Sub163.5 Kg01-N125A-0112O'Ring 0.03 Kg2Washer1.5 Kg01-N125A-0213Piston 137.7Kg3O'Ring0.03 Kg01-N125A-0314Piston Case 247.5Kg4Check Valve1.5 Kg01-N125A-0415Cuided Sleeve 29.7 Kg5Spring0.2 Kg01-N125A-0516Check Ring 0.2 Kg6Adjuster Shim0.7 Kg01-N125A-0617RetainerRing 7 Kg7Rubber Buffer0.3 Kg01-N125A-0718O'Ring 0.3 Kg8Rubber Buffer0.3 Kg01-N125A-0819Washer 1.5 Kg9Valve Seat11.8 Kg01-N125A-0920Drive Chuck 67.2 Kg10Rigid Valve27.4 Kg01-N125A-1021Drill Bit11O'Ring0.03 Kg01-N125A
Contact Now
ProductProduct Parameters： Hole Depth 30 m Drill Pipe Sizes φ76×3,000 mm Hole Dia φ110-138 mm Hammer 4”/5" Rotation Torque(Max.) 3,200 N.m Rotation Speed 0-100 rpm Working Pressure 0.7-2.5 Mpa Length of Feed Beam 5,645 mm Feed Travel Length 3,660 mm Feed Extension 960 mm Feed Speed 26 m/min Feed Force 20 kN Pull Up Force 45 kN Feed Type Chain &
Contact Now
SP35AButton qty.pcs*dia.mmWeight(Kg)Head shapeHead Diameter (mm)Shank LengthSplinePort holesButton Type (Optional)Gauge ButtonsFront ButtonsFlat Face90 150 6 2 Domed+Ballistic6*Φ145*Φ124.3 Flat Face95 150 6 2 Domed+Ballistic6*Φ145*Φ124.4 Flat Face100 150 6 2 Domed+Ballistic6*Φ146*Φ124.6 Flat Face108 150 6 2 Domed+Ballistic8*Φ136*Φ124.9 CompanyJS DRILL is a large-scale professional manufacturer of high, medium and low wind pressure down-the-hole drilling rigs and water well drilling ri
Contact Now
Equipped with energy-saving intelligent control system, energy saving voltage regulation system, comprehensive fuel consumption reduction by 10 to 15 %;One-key switch for dual working conditions, Reliable separation system, decreased oil discharge.ParameterNumber CSH660A-21DCSH1250A-25DCSH1380A-34D1Compressor2Exhaust Pressure (Bar)2117 17-25 25 21-343Volume Flow (m3/min)1835 35-33 39 39-354Lubricating Oil Capacity (L)90160 1655Engine6Standard working conditionSingle working conditionDouble working conditionDouble working condition7ManufacturerVolvoVolvoVolvo8Model
Contact Now
Unique dual-circuits return oil design plus air-water separator,ensure the controlling circuit air high dryness, reduce the failure of solenoid valve.Dual mode frequency conversion integrated control simplifies circuits, increases the control accuracy of the cooling fan, and enables the air compressor to work smoothly in various temperatures.110 SFeT-4.5 110： Electric motor power 110kW S：ScrewF： Air cool -4.5： Rated pressure 4.5bar e：Various frequency T：Two-stage compression 110 SFeT-4.5ParameterElectric motor powerDischarge air volume FADWork pressure75
Contact Now
Dual-mode frequency conversion integrated control simplifies circuits, increases the control accuracy of the cooling fan, and enables the air compressor to work smoothly in various ambient temperature environments. The air intake system adopts heavy load air filter, the unique design of the intake box can filter the dust particles in the air more effectively, ensure the intake quality and extend the service life of the air compressor.132 SFeT-8132：Electric motor power 132kWS：Screw F：Air cool -8：Rated pressure 8bar e：Various frequency T：Two-stage compression 132 SFeT-8ParameterEl
Contact Now
Equipped with heavy duty 6 bearing screw air end,which makes the air compressor running stably and the service life is greatly increased. Adopts high efficient freeze dryer and 4-stage high efficient and precise filter to ensure access to pure compressed air, pressure dew point as low as 2-10℃. Equipped with high performance temperature control valve effectively avoid the phenomenon of emulsification of compressor oil. 22 SLe-1622： Electric motor power 22kW S：Screw L： Laser -16：Rated pressure 16bar e：Various frequency NO T：Single-stage compression 22 SLe-16Pa
Contact Now
IntroductionDiesel portable screw air compressorDiesel portable screw air compressor is widely used in highway, railway, mining,water conservancy, shipbuilding, urban construction, energy, military industry and other industries.ParametersModel145SCYT-12-18S162SCYT-18186SCYT-15-19198SCYT-18-22220SCYT-15-18220SCYT-23298SCYT-24China IV engine(standard)Yuchai/140 kWYuchai/162 kWYuchai/191 kWYuchai/191 kWWeichai/221 kWWeichai/221 kWYuchai/294 kWDiesel tank volume230 L230 L345 L345 L345 L345 L485 LRated FAD17/15 m³/min17 m³/min24/20 m³/min22/18 m³/min26/24 m³/min22
Contact Now
IntroductionDiesel portable screw air compressorDiesel portable screw air compressor is widely used in highway, railway, mining, water conservancy, shipbuilding, urban construction, energy, military industry and other industries.ParametersModel110SCYT-18145SCYT-12-18198SCYT-18-22China IV engine(standard)Yuchai118 kWYuchai140 kWYuchai191 kWDiesel tank volume230 L230 L330 LRated FAD12 m³/min17/15 m³/min22/18 m³/minRated Pressure18 bar12/18 bar18/22 barWeight2.350 kg2.900 kg3.400 kgType2 wheelDimensions (LxWxH)3,800×2,100×2,300 mm4,350×2,200×2,370 mm4,500×2,200×2,450 mmComp
Contact Now
ParametersModel60SCY-7110SCY.10141SCY-12-15China IV engine(standard)Xichai/55 kWYuchai/118 kWYuchai/140 kWDiesel tank volume85 L135 L230 LAir EndSingle Stage CompressionRated FAD9 m³/min12.5 m³/min18/15 m³/minRated Pressure7 bar10 bar12/15 barWeight1.280 kg2,350 kg2.600 kgType2 wheel4 wheel4 wheelDimensions (LxWxH)2,700×1,600×1,700 mm3,000×1,610×2,350 mm3,250×1,610×2,470 mmCompanyWe established in 2018and is located in shandong jining province ,enjoying convenient transportation and beautiful environment.Our company covers an area of 600 square meters and
Contact Now
IntroductionGenerators are widely used in industrial and agricultural production, national defense, science and technology, and daily life.
Contact Now
PartsWeight /kgPartsWeight /kg1 Tup Sub274 Kg13Rigid Valve0.3 Kg2 Adjuster Shim2.9 Kg14 Rubber Buffer0.3 Kg3 "O"Ring0.03 Kg15 "O"Ring0.03 Kg4 Check Valve3.4 Kg16 Pole seat50 Kg5 Spring0.3 Kg17 "O"Ring0.03 Kg6 Regulate ring1.5 Kg18 Piston347 Kg7 Disc Sping1.35 Kg19 Piston Case562 Kg8 Disc Sping1.35 Kg20 Check Ring0.3 Kg9 Disc Sping1.35 Kg21 Retainer Ring10 Kg10 Disc Sping1.35 Kg22 Adjuster Shim2.9 Kg11 Valve Seat26.4 Kg23 Driver Chuck155 Kg12 RubberBuffer0.
Contact Now
Product Parameters：Overall weight (T)9.2Dimension(mm)5150*2100*2150Drilling diameter (mm)60-110Drilling depth (m)1000Traveling speed (km/h)2.5Climbing ability(max）30°Mud pump modelBW160-10Drilling angle(°)45°-90°Drill pipe length(m)1.5Main machine power (kw)132kwLifting force(T)14Slewing speed(rpm)0-1200Company:The company lies in rencheng city shandong jining province ,with workshop space of 1000 m2 and more than 30 employees.The transportation is very convenient.
Contact Now
Inverter starting avoids grid shocks, intelligent inverter air pressure control reduces energy-intensive run times, and precise constant voltage control maintains system pressure deviations within 0.1 bar. Every detail is greatly optimized on the whole system and pipeline, ensure its stability as well as reduce the energy consumption as much as possible90 SFe-890：90kW / Electric motor power S：Screw F：Air cool -8：8bar / Rated pressure 8bar e：Various frequency NO T：Single-stage compression 90 SFe-8ParameterElectric motor powerDischarge air volume FADWork pressure55-132 K
Contact Now
IntroductionAir compressors are widely used in highway, railway, mining, water conservancy, shipbuilding,urban construction, energy, military and other industries.ParametersModel75SDY-890SDY-890SDY-14.5Air EndSingle Stage CompressionType4 wheelMotor Protection ClassIP54Rated Pressure8 bar8 bar14.5 barRated FAD13.2 m3/mir15.5 m³/min13 m³/minMotor Power75 kW90 kW90 kWWeight2,020 kg2,125 kg2,120 kgDimensions (LxWxH)3,050×1,620×2,090 mmCompany:The company lies in rencheng city shandong jining province ,with workshop space of 1000 m2 and more th
Contact Now
Reliable Performance Basing on the guideline of purchasing the critical auxiliary equipment internationally, the dieselengine, the hydraulic pump, the main valves, the motors, crawler reducers and key hydraulic spare parts are all adopted famous brands products at home and abroad.High EfficiencyWith big torque, high power unit allocation and with reasonable structure design and advanced operation method, all these guarantee the drill rig’s high operation and performance efficiency.Product Parameters：Overall weight (T)8.1Dimension(mm)5100*2200*2350Drilling diameter (mm)60-110Drilling
Contact Now
JS412 drill rig operation platform,tramming components,hydraulic system,feed beam & rotary head are upgraded from the original the functional capability of the drill rig.
Contact Now
Relate News
A customer from Puerto Rico in the United States asked our company to customize a 200-meter crawler water well drilling rig with diesel power generation/61kw.First, we will draw a rough model according to the customer's requirements, and then the designer will make a prototype based on the graphics. Now it has been made for the customer.
1. What is the warranty of our machine?Our main machine enjoys a 1 year warranty(except for the hammer), during this time all accessories broken can be changed for a new one.And we provide videos for machine install and operation.2. What is your terms of packing?Generally, we use standard exported wooden case for LCL goods, and fixed well for FCL goods.
If you need a drill rig for various purposes such as drilling a well to obtain natural resources (water, oil, geothermal energy, etc.) building a foundation, drilling holes in a mine, taking samples from the ground.It is necessary to first determine the purpose of the drilling rig and what kind of terrain it will mainly operate on. Depending on the terrain, you can choose different types of drilling rigs: rotary drilling rigs, impact drilling rigs, down-the-hole drilling rigs, top hammer drilling rigs (with high hammer), etc.
For the construction machinery industry, its development mainly has the following three characteristics:1. Industry development is closely related to national macroeconomic developmentFor the construction machinery industry, the development of the industry is closely related to the development of downstream demand markets. The development of downstream industries such as the real estate industry, infrastructure industry, power industry, and coal industry has a high impact on the growth of demand for various types of construction machinery and equipment. Relevance.
Drilling rig is a complex machine, which consists of machines, units and mechanisms. A drilling rig is a mechanical device that drives drilling tools to drill underground to obtain physical geological data during exploration or development of mineral resources (including solid minerals, liquid minerals, gas minerals, etc.). Also called drilling machine. The main function is to drive the drilling tool to break the rock at the bottom of the hole, and to lower or lift the drilling tool in the hole. It can be used to drill rock cores, ore cores, cuttings, gaseous samples, liquid samples, etc.
The factory has become busy recently. As the number of customers gradually increases, so do the orders. However, we will still strictly control product quality so that customers can rest assured. The service quality will also increase accordingly.
Zoucheng Jusheng Mining Machinery Co., Ltd. (Shandong) was established in 2 0 1 8. The company's annual sales are more than 1 5 million US dollars. Before the establishment of the company, we have 1 5 years of experience in equipment sales and service. As one of the excellent authorized agents of ZEGA brand mining machinery, we supply ZEGA brand mining rigs and air compressors to global customers. At present, JS Drill has reached long-term cooperation with customers in more than 5 0 countries around the world.
1. What is your terms of delivery?EXW, FOB, CFR, CIF.We have a very good cooperation in shipping logistics, and the price is low.Not only our product price is advantageous, but also our logistics price. 2. How about your delivery time?Generally, it will take 7-10 working days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. We have the goods in stock and they will be shipped from the factory within three days.
Visiting a construction site abroad1 Visiting processSafety training:Before entering the construction site, I received a safety training. The training content may include safety regulations of the construction site, emergency response measures, correct use of personal protective equipment, etc.Listen carefully to the safety training, comply with the safety regulations of the construction site, and ensure your own safety.2 Site tour:The site staff will lead the tour.
What is your terms of payment? T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
