Multifuctional Drill Rig-manufacture,factory,supplier from China
(Total 24 Products for Multifuctional Drill Rig)
JS412 drill rig operation platform,tramming components,hydraulic system,feed beam & rotary head are upgraded from the original the functional capability of the drill rig.
Contact Now
The steel track is durable, lasts longer and protects the drill rig.
Contact Now
Automatic drill pipe handling system with powerful off-road performance for less rig preparation time.Large displacement and high pressure screw air compressor for thorough flushing,to highly increase rock drilling speed and reduce the consumption of drilling tools.Powerful feeding and rotation design for less jamming in complex rock situation.Single operator for labor costs.Product Parameters：Engine YC6J220-T300162kW@2,200 rpmYuchai YC6J220-T300162 kW@2,200 rpm YC6L310-H3002 30 kW@2,000rpmYuchai YC6L310-H300230 kW@2,000 rpmHole Rangeφ90-115 mmφ90-138 mmDrill Pipe Storage7+17+1Drill
Contact Now
Powerful two-speed hydraulic tramming mechanism with excellent off-road performance.Bigger and stronger designed rotation unit for smooth high torque output and less drill tool jamming.Two stage dry dust collector for friendly environment and higher production efficiency.Integrated design(air compressor on board)for better long-distance fleet management.Product Parameters:EngineYuchai YC6A260L 191 kWHole Depth20 mDrill Pipe Sizesφ76×3,000 mmHole Diaφ90-138 mmDTH Hammer4”Rotation Torque(Max.)2,500 N.mRotation Speed0-100 rpmWorking Pressure17 barF.A.D16m³/minTramming Speed (Max.)3
Contact Now
Equipped with Yuchai YC6J220 power pack 12/15m³/min Air compressor for hole diameter φ90-115mm and with dry dust collector.JS421 Integrated DTH Surface drill rig with single power pack(only one diesel engine)to drive both screw air compressor and hydraulic system,compared with separated drill rigs,the fuel consumption reduced by 35%and maintenance cost down by 50%.Product Parameters：PowerYuchai YC6J220162 kWHole Depth 20 mDrill Pipe Sizes φ60 mm×3,000 mmHole Dia φ90-115mmDTH Hammer 3.5"RotationTorque(Max.) 1,258 N.mR
Contact Now
ProductProduct Parameters：Hole Depth 30 mDrill Pipe Sizes Φ76mm×3,000 mmHole Dia Φ110-138 mmHammer 4”/5”Rotation Speed 0-100 rpmWorking Pressure 0.7-2.5 Mpa F.A.D 8-20 m³/min Feed Force 20 KN Pull Up Force 45 KNFeed Type Chain /CylinderTramming Speed(Max.） 3 km/hGradient 25°Total Weight 5,200 kg/5,500 kgTransportation Dimensions 5,100×2,260 ×2,500 mmDry Dust Collector OptionCompany: "New step, new jou
Contact Now
Button qty.pcs*dia.mmHead shapeHead Diameter (mm)Shank LengthSplinePort holesButton Type (Optional)Gauge ButtonsFront Buttonsconcave face 154 231 12 2 Domed8*Φ184*Φ16+4*Φ15Flat Face 165 231 12 2 Domed+Ballistic8*Φ188*Φ16concave face 171 231 12 2 Domed8*Φ186*Φ16+4*Φ15concave face 178 231 12 2 Domed8*Φ186*Φ16+5*Φ15concave face 190 231 12 3 Domed9*Φ186*Φ16+5*Φ15concave face 203 231 12 2 Domed10*Φ188*Φ16+6*Φ15Company Our company is a large-scal
Contact Now
Button qty.pcs*dia.mmWeight(Kg)Head shapeHead Diameter (mm)Shank LengthSplinePort holesButton Type (Optional)Gauge ButtonsFront Buttonsconvex face 140 185 10 2 Domed+Ballistic7*Φ184*Φ15+3*Φ1413.2 Flat Face 146 185 10 2 Domed8*Φ188*Φ1413.9 Flat Face 152 185 10 2 Domed+Ballistic8*Φ188*Φ1414.3 Flat Face 165 185 10 2 Domed+Ballistic8*Φ186*Φ1616.3 concave face 178 185 10 2 Domed8*Φ185*Φ1417.8 CompanyOur products are sold to Thailand, Chile, Cana
Contact Now
The drill pipe is threaded connection, using seamless steel pipe, forging and quenching treatment, strong torsion resistance, and grease lubrication.
Contact Now
Working principle of down-the-hole drilling rig impactor:The compressed gas enters the impactor through the drill pipe, and is then discharged from the drill bit. The discharged exhaust gas is used to discharge ballast.
Contact Now
Working principle of down-the-hole drilling rig impactor:The compressed gas enters the impactor through the drill pipe, and is then discharged from the drill bit. The discharged exhaust gas is used to discharge ballast.
Contact Now
SP35AButton qty.pcs*dia.mmWeight(Kg)Head shapeHead Diameter (mm)Shank LengthSplinePort holesButton Type (Optional)Gauge ButtonsFront ButtonsFlat Face90 150 6 2 Domed+Ballistic6*Φ145*Φ124.3 Flat Face95 150 6 2 Domed+Ballistic6*Φ145*Φ124.4 Flat Face100 150 6 2 Domed+Ballistic6*Φ146*Φ124.6 Flat Face108 150 6 2 Domed+Ballistic8*Φ136*Φ124.9 CompanyJS DRILL is a large-scale professional manufacturer of high, medium and low wind pressure down-the-hole drilling rigs and water well drilling ri
Contact Now
Button qty.pcs*dia.mmHead shapeHead Diameter (mm)Shank LengthSplinePort holesButton Type (Optional)Gauge ButtonsFront Buttonsconcave face190 220 10 3 Domed9*Φ186*Φ16+5*Φ15concave face195 220 10 3 Domed9*Φ186*Φ16+5*Φ15concave face203 220 10 2 Domed10*Φ188*Φ16+6*Φ15CompanyAbout Us, since its inception, has maintained the culture of innovation.
Contact Now
JS416 is configured with a powerful dual-motor driven rotary head and its rotary torque can reach 1,950N.m,and its rotary speed is adjustable combined with a multi-way regulating valve.Product Parameters：Drill Pipe Sizes φ60×3,000 mmDrill Pipe Dia φ90-127 mmRotation Torque(Max) 1,950 N.mRotation Speed 0-150 rpmFeed Force 15 kNPull Up Force 25 kNFeeding Type Hydraulic cylinder-chainTramming Speed (Max.) 2.5 km/hGradient 25°Total Weight 4,500 kg/4,250 kgTransportation Dime
Contact Now
Button qty.pcs*dia.mmHead shapeHead Diameter (mm)Shank LengthSplinePort holesButton Type (Optional)Gauge ButtonsFront Buttonsconcave face203 260 12 2 Domed10*Φ184*Φ18+10*Φ16concave face216 260 12 2 Domed10*Φ184*Φ18+10*Φ16concave face230 260 12 2 Domed12*Φ1812*Φ18+6*Φ16concave face235 260 12 2 Domed12*Φ1812*Φ18+6*Φ16concave face254 260 12 2 Domed12*Φ1812*Φ18+8*Φ16concave face275 260 12 2 Domed12*Φ188*Φ16+19*Φ16concave face305 260 12 3 Domed15*Φ1812*Φ1
Contact Now
Description:The impactor of a down-the-hole drilling rig is a key component of down-the-hole drilling rig drilling. It is used to provide axial reciprocating rock-breaking impact force to the drill bit in order to cool the drill bit and entrain cuttings. It is also the power fluid for downhole power drilling tools.
Contact Now
The drill pipe is threaded connection, using seamless steel pipe, forging and quenching treatment, strong torsion resistance, and grease lubrication.
Contact Now
Working principle of down-the-hole drilling rig impactor:The rotary motion of the impactor is provided by the rotary head, and the shaft thrust is provided by the propeller and transmitted to the impactor through the drill rod. The card sleeve is mainly used to transmit propulsion force and rotational motion to the drill bit.
Contact Now
The drilling rig is equipped with a high-power hydraulic motor and hydraulic drill arm,which can carry out DTH hammer drilling,and is equipped with a large-flow mud pump,which can realize mud drilling.Product Parameters：NameModelParameterCar ChassisSpecial ChassisSinotruk SINOTRUK 6X4 ,290HP RigTower bearing capacity: 50T Two hydraulic cylinders Oil cylinder rig height: 6M Lift Feed Cylinder Feeding force: 15TLifting force: 30T Hydraulic Outriggers Four hydraulic outriggersDrilling PowerChassis power WinchLifting force 2TPower HeadTorque:10000NM Speed: 0-90 RPM Foam PumpFlow 42L/MIN
Contact Now
This model is the classic product series of separated drill rigs of JS DRILL,and with full function design of super intensity and high-level configuration,is approved by many users.ProductProduct Parameters： Hole Depth 30 m Drill Pipe Sizes φ76mm×3,000 mm Hole Dia φ110-165 mm DTH Hammer 4"/5” Rotation Torque(Max.) 3,500 N.m Rotation Speed 0-100 rpm Working Pressure 0.7-2.5 Mpa F.A.D 10-20 m³/min Feed Force 20 kN Pu
Contact Now
PartsWeight /kgPartsWeight /kg1 Tup Sub 163.5 Kg 12 "O"Ring0.03 Kg2 Washer 1.5 Kg 13 Piston154 Kg3 "O"Ring0.03 Kg 14 Piston Case246.5Kg4 Check Valve1.5 Kg 15 Cuided Sleeve12.7 Kg5 Spring0.2 Kg 16 Check Ring0.2 Kg6 Adjuster Shim0.7 Kg 17 Retainer Ring7 Kg7RubberBuffer0.3 Kg 18 "O"Ring0.3 Kg8Rubber Buffer0.3 Kg 19 Washer1.5 Kg9Valve Seat11.8 Kg 20 Driver Chuck68.5 Kg10 Rigid Valve27.4 Kg 21 Drill Bit11
Contact Now
Product Parameters：Overall weight (T)9.2Dimension(mm)5150*2100*2150Drilling diameter (mm)60-110Drilling depth (m)1000Traveling speed (km/h)2.5Climbing ability(max）30°Mud pump modelBW160-10Drilling angle(°)45°-90°Drill pipe length(m)1.5Main machine power (kw)132kwLifting force(T)14Slewing speed(rpm)0-1200Company:The company lies in rencheng city shandong jining province ,with workshop space of 1000 m2 and more than 30 employees.The transportation is very convenient.
Contact Now
Button qty.pcs*dia.mmHead shapeHead Diameter (mm)Shank LengthSplinePort holesButton Type (Optional)Gauge ButtonsFront Buttonsconcave face190 250 8 3 Domed9*Φ186*Φ16+5*Φ15concave face195 250 8 3 Domed9*Φ186*Φ16+5*Φ15concave face203 250 8 2 Domed10*Φ188*Φ16+6*Φ15CompanyWe are an Eminent Manufacturer, Supplier and Exporter of Water well drilling rig ,Down the hole (DTH) drilling tools, Generator set, Air compressor and Related products used in Water Drilling, Mining, Tunneling, Quarrying and Construction Industries. Packaging
Contact Now
PartsWeight /kgPartsWeight /kg1 Top Sub2.5 Kg9 Guided Sleeve0.52 Kg2 "O"Ring0.01 Kg10 Retainer Ring0.1 Kg3 Check Valve0.08 Kg11 "O"Ring0.01 Kg4 Spring0.05 Kg12 Drive Chuck1.2 Kg5 Valve Seat0.5 Kg13 Drill Bit6 Inner Cylinder0.6 Kg7 Piston2.3 Kg8 Piston Case4.5 KgTechnical parametersLength(Less bit)Weight Outer diameterConnection ThreadBit ShankHole Range810mm 12.5Kg64mm RD50 BOX BR2 70-90mmWorking PressureRecommended Rotation SpeedAir Consumption1.0 Mpa1.4Mpa0.8
Contact Now
Relate News
Drilling rig is a complex machine, which consists of machines, units and mechanisms. A drilling rig is a mechanical device that drives drilling tools to drill underground to obtain physical geological data during exploration or development of mineral resources (including solid minerals, liquid minerals, gas minerals, etc.). Also called drilling machine. The main function is to drive the drilling tool to break the rock at the bottom of the hole, and to lower or lift the drilling tool in the hole. It can be used to drill rock cores, ore cores, cuttings, gaseous samples, liquid samples, etc.
If you need a drill rig for various purposes such as drilling a well to obtain natural resources (water, oil, geothermal energy, etc.) building a foundation, drilling holes in a mine, taking samples from the ground.It is necessary to first determine the purpose of the drilling rig and what kind of terrain it will mainly operate on. Depending on the terrain, you can choose different types of drilling rigs: rotary drilling rigs, impact drilling rigs, down-the-hole drilling rigs, top hammer drilling rigs (with high hammer), etc.
A customer from Puerto Rico in the United States asked our company to customize a 200-meter crawler water well drilling rig with diesel power generation/61kw.First, we will draw a rough model according to the customer's requirements, and then the designer will make a prototype based on the graphics. Now it has been made for the customer.
Zoucheng Jusheng Mining Machinery Co., Ltd. (Shandong) was established in 2 0 1 8. The company's annual sales are more than 1 5 million US dollars. Before the establishment of the company, we have 1 5 years of experience in equipment sales and service. As one of the excellent authorized agents of ZEGA brand mining machinery, we supply ZEGA brand mining rigs and air compressors to global customers. At present, JS Drill has reached long-term cooperation with customers in more than 5 0 countries around the world.
The factory has become busy recently. As the number of customers gradually increases, so do the orders. However, we will still strictly control product quality so that customers can rest assured. The service quality will also increase accordingly.
1. What is the warranty of our machine?Our main machine enjoys a 1 year warranty(except for the hammer), during this time all accessories broken can be changed for a new one.And we provide videos for machine install and operation.2. What is your terms of packing?Generally, we use standard exported wooden case for LCL goods, and fixed well for FCL goods.
For the construction machinery industry, its development mainly has the following three characteristics:1. Industry development is closely related to national macroeconomic developmentFor the construction machinery industry, the development of the industry is closely related to the development of downstream demand markets. The development of downstream industries such as the real estate industry, infrastructure industry, power industry, and coal industry has a high impact on the growth of demand for various types of construction machinery and equipment. Relevance.
What is your terms of payment? T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
1. What is your terms of delivery?EXW, FOB, CFR, CIF.We have a very good cooperation in shipping logistics, and the price is low.Not only our product price is advantageous, but also our logistics price. 2. How about your delivery time?Generally, it will take 7-10 working days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. We have the goods in stock and they will be shipped from the factory within three days.
Visiting a construction site abroad1 Visiting processSafety training:Before entering the construction site, I received a safety training. The training content may include safety regulations of the construction site, emergency response measures, correct use of personal protective equipment, etc.Listen carefully to the safety training, comply with the safety regulations of the construction site, and ensure your own safety.2 Site tour:The site staff will lead the tour.
