N125-manufacture,factory,supplier from China
(Total 24 Products for N125)
PartsWeight /kgPartsWeight /kg1 Tup Sub 163.5 Kg 12 "O"Ring0.03 Kg2 Washer 1.5 Kg 13 Piston154 Kg3 "O"Ring0.03 Kg 14 Piston Case246.5Kg4 Check Valve1.5 Kg 15 Cuided Sleeve12.7 Kg5 Spring0.2 Kg 16 Check Ring0.2 Kg6 Adjuster Shim0.7 Kg 17 Retainer Ring7 Kg7RubberBuffer0.3 Kg 18 "O"Ring0.3 Kg8Rubber Buffer0.3 Kg 19 Washer1.5 Kg9Valve Seat11.8 Kg 20 Driver Chuck68.5 Kg10 Rigid Valve27.4 Kg 21 Drill Bit11
Contact Now
Product Description:As one of the important components of the entire down-the-hole drilling tool, the down-the-hole impactor is a working device of the down-the-hole drilling rig. The down-the-hole impactor is divided into low-wind pressure down-the-hole impactor, medium-pressure down-the-hole impactor and high-wind pressure down-the-hole impactor. Impactor.It can convert air pressure into impact energy, and simultaneously transfer impact energy and rotational force to the down-the-hole drill bit. The drill bit has fast drilling speed and low air consumption.
Contact Now
The impactor of a down-the-hole drill is a key component of the drilling process of a down-the-hole drill. It is used to provide axial reciprocating rock-breaking impact force to the drill bit in order to cool the drill bit and carry rock cuttings, etc. It is also the power fluid of the bottom hole power drill tool.Working principle of the impactor of a down-the-hole drill:The compressed gas enters the impactor through the drill pipe and is then discharged from the drill bit.
Contact Now
Product Description :The impactor of a down-the-hole drilling rig is a key component of down-the-hole drilling rig drilling.It is also the power fluid for downhole power drilling tools.
Contact Now
Working principle of down-the-hole drilling rig impactor:The compressed gas enters the impactor through the drill pipe, and is then discharged from the drill bit. The discharged exhaust gas is used to discharge ballast.
Contact Now
Working principle of down-the-hole drilling rig impactor:The compressed gas enters the impactor through the drill pipe, and is then discharged from the drill bit. The discharged exhaust gas is used to discharge ballast.
Contact Now
Description:The impactor of a down-the-hole drilling rig is a key component of down-the-hole drilling rig drilling. It is used to provide axial reciprocating rock-breaking impact force to the drill bit in order to cool the drill bit and entrain cuttings. It is also the power fluid for downhole power drilling tools.
Contact Now
Working principle of down-the-hole drilling rig impactor:The rotary motion of the impactor is provided by the rotary head, and the shaft thrust is provided by the propeller and transmitted to the impactor through the drill rod. The card sleeve is mainly used to transmit propulsion force and rotational motion to the drill bit.
Contact Now
Performance characteristics of down-the-hole drilling rig impactors:1. The contemporary new rock drilling theory is used to design the internal structural dimensions of the impactor, so that the impactor can obtain ideal energy transfer, with large single impact power and fast rock drilling speed.2. Unique taper diameter reduction design.
Contact Now
ProductProduct Parameters：Hole Depth 30 mDrill Pipe Sizes Φ76mm×3,000 mmHole Dia Φ110-138 mmHammer 4”/5”Rotation Speed 0-100 rpmWorking Pressure 0.7-2.5 Mpa F.A.D 8-20 m³/min Feed Force 20 KN Pull Up Force 45 KNFeed Type Chain /CylinderTramming Speed(Max.） 3 km/hGradient 25°Total Weight 5,200 kg/5,500 kgTransportation Dimensions 5,100×2,260 ×2,500 mmDry Dust Collector OptionCompany: "New step, new jou
Contact Now
1. Bit without foot valve will avoid the problem of foot valve broken or thermal expansion2.
Contact Now
Automatic drill pipe handling system with powerful off-road performance for less rig preparation time.Large displacement and high pressure screw air compressor for thorough flushing,to highly increase rock drilling speed and reduce the consumption of drilling tools.Powerful feeding and rotation design for less jamming in complex rock situation.Single operator for labor costs.Product Parameters：Engine YC6J220-T300162kW@2,200 rpmYuchai YC6J220-T300162 kW@2,200 rpm YC6L310-H3002 30 kW@2,000rpmYuchai YC6L310-H300230 kW@2,000 rpmHole Rangeφ90-115 mmφ90-138 mmDrill Pipe Storage7+17+1Drill
Contact Now
PartsWeight /kgPart No1Top Sub21.5 01-SP680-01 2O'Ring0.01 01-SP680-02 3Disc Spring 0.34 01-SP680-03 4Check Valve0.56 01-SP680-04 5Spring0.05 01-SP680-05 6Valve Seat 4.3 01-SP680-06 7Inner Cylinder4.2 01-SP680-07 8Piston23 01-SP680-08 9Piston Case33 01-SP680-09 10Guided Sleeve5.5 01-SP680-10 11Check Ring0.02 01-SP680-11 12Retainer Ring1 01-SP680-12 13O'Ring0.01 01-SP680-13 14Drive Chuck7 01-SP680-14 15Drill Bit 01-SP680-15 Techn
Contact Now
PartsWeight /kgPart No1Top Sub13.501-ND55S-012O'Ring0.0101-ND55S-023Check Valve0.601-ND55S-034Spring0.0601-ND55S-045Valve Seat 1.8501-ND55S-056Inner Cylinder3.101-ND55S-067Piston11.801-ND55S-078Piston Case22.501-ND55S-089Guided Sleeve2.301-ND55S-0910Check Ring0.0201-ND55S-1011Retainer Ring0.501-ND55S-1112O'Ring0.0101-ND55S-1213Drive Chuck5.801-ND55S-1314Drill Bit01-ND55S-14Technical parametersLength(Less bit)Weight Outer diameterConnection ThreadBit ShankHole Range1119mm 62Kg117mm API3 1/2"REG ND55S 127-145mmWorking PressureRecommended Rot
Contact Now
ParameterNumber CSH580A-16E CSH660A-20E CSH750A-21E CSH1080A-17E CSH1080A-24E1Compressor2Exhaust Pressure (Bar)16202117243Volume Flow (m3/min)16182130304Lubricating Oil Capacity (L)357090901105Engine6Head Power (kW)1321601802002507Rated speed (rpm)149014901490149029808Protection levelIP55/FIP55/FIP55/FIP55/FIP55/F9Operating Machine10Machine weight (t)2.22.82.834.511Dimensions (mm)2980x1600x1900 3200x1800x2100 3200x1800x2100 3200x1800x2100 3800x1800x2300CompanyWe have four different locations for warehouses which includes Shandong, Yunnan, Hunan, and
Contact Now
A variety of different matrices are used for different rock formations,can get longer life with fast drilling speed.PartsWeight /kgPart No1Top Sub361.501-SP1880-012Adjuster Shim401-SP1880-023O'Ring0.0101-SP1880-034Check Valve3.401-SP1880-045Spring0.401-SP1880-056Valve Seat 7601-SP1880-067Inner Cylinder54.501-SP1880-078Piston36601-SP1880-089Piston Case49301-SP1880-0910Guided Sleeve6901-SP1880-1011Check Ring101-SP1880-1112Retainer Ring14.801-SP1880-1213O'Ring0.0801-SP1880-1314Adjuster Shim401-SP1880-1415Drive Chuck13401-SP1880-1516Drill Bit01-SP1880-16Technical parametersLength(Less
Contact Now
IntroductionGenerators are widely used in industrial and agricultural production, national defense, science and technology, and daily life.
Contact Now
PartsWeight /kgPartsWeight /kg1Top Sub 160 Kg9Piston Case317 Kg2Adjuster Shim 1.5 Kg10Guided Sleeve43.5 Kg3O'Ring0.05 Kg11Check Ring0.5 Kg4Check Valve3.4 Kg12Retainer Ring12.4 Kg5Spring0.4 Kg13O'Ring0.03 Kg6Valve Seat31.5 Kg14Adjuster Shim1.9 Kg7Inner Cylinder28.7 Kg15Drive Chuck77.4 Kg8Piston173 Kg16Drill BitTechnical parametersLength(Less bit)Weight Outer diameterConnection ThreadBit ShankHole Range1861mm 851Kg332mm API7 5/8"REG SP330350-550mmWorking PressureRecommended Rotation SpeedAir Consumption1.8 Mpa
Contact Now
The degree of automation is high, and the operator does not need to undergo long-term training, and unattended operation can be achieved. It has the characteristics of forced gas transmission, and the volume flow is almost unaffected by the exhaust pressure, and it can maintain high efficiency in a wide range of speeds.ParametersModelRatedFADMotorPowerRatedPressureAirEndMotorProtectionClassWeightDimensions (LxWxH)90SCFT-820 m³/min90 kW8 barTwoStageCompressionIP542,185 kg2,825×1,525×1,620 mm110SCFT-823 m³/min110 kW2.490 kg2,965×1,525×1,740 mm132SCFT-827&
Contact Now
ParametersModel60SCY-7110SCY.10141SCY-12-15China IV engine(standard)Xichai/55 kWYuchai/118 kWYuchai/140 kWDiesel tank volume85 L135 L230 LAir EndSingle Stage CompressionRated FAD9 m³/min12.5 m³/min18/15 m³/minRated Pressure7 bar10 bar12/15 barWeight1.280 kg2,350 kg2.600 kgType2 wheel4 wheel4 wheelDimensions (LxWxH)2,700×1,600×1,700 mm3,000×1,610×2,350 mm3,250×1,610×2,470 mmCompanyWe established in 2018and is located in shandong jining province ,enjoying convenient transportation and beautiful environment.Our company covers an area of 600 square meters and
Contact Now
PartsWeight /kgPart No1Top Sub38.501-SP880-012O'Ring0.0201-SP880-023Check Valve0.6501-SP880-034Spring0.101-SP880-045Valve Seat 6.201-SP880-056Inner Cylinder7.401-SP880-067Piston44.501-SP880-078Piston Case69.501-SP880-089Guided Sleeve6.101-SP880-0910Retainer Ring1.201-SP880-1011O'Ring0.0101-SP880-1112Drive Chuck19.301-SP880-1213Drill Bit01-SP880-13Technical parametersLength(Less bit)Weight Outer diameterConnection ThreadBit ShankHole Range1354mm193Kg185mmAPI4 1/2"REG ND85A198-254mmWorking PressureRecommended Rotation SpeedAir Consumption
Contact Now
Advantage1 New designed protected cooler for higher efficiency and better safety protection. Full body sound absorbent cotton and rear car silencer designed to make operate noise reduce 40% less than normal products.2 Large stand-alone capacity, no clearance volume, reasonable structure and ideal force balance, long lifeof the host, easy maintenance and few wearing parts.ParameterLUY110-10LUY110-12LUY125-7LUY170-17LUY215-12LUY235-9LUY180-19LUY215-21Working pressure,bar(psi)10(150)12(175)7 (100)17(250)12 (175)8.6(125)19(275)21(305)Flow,I/s|cfm|m3/min180|385|11180|385|11205
Contact Now
Product Product parametersname Crawler Electric Drillingmodel JSD-260Hard rock F=6-20， Medium hardness rock gas consumption6 m2/min In adaptive rocks Drilling diameter 30m/60-160mdrill pipe diameter50/60mm Weight 700kgdimensions 2.2M*1.3M*2.2M Motor Power 380V/22KW/1400r Company Inside the factories, we have two pieces assembly line production to make sure that our operationsare efficient and effective.
Contact Now
The cooler is fixed with mounting plate, which avoids damage or oil leakage caused by stress in the contact area caused by thermal expansion, and prolongs the service life of the cooler.250 SFeD-3.5 250：Electric motor power 250kW S：Screw F：Air cool -3.5：Rated pressure 3.5bar e：Various frequency D：low pressure NO T：Single-stage compression250 SFeD-3.5ParameterElectric motor powerDischarge air volume FADWork pressure75-250 kW23.7-76.1 m³/min 3.5 barModelElectricmotor powerAir dischargecapacity FADRated speedWeightDimensions(LxWxH)Air&n
Contact Now
Relate News
A customer from Puerto Rico in the United States asked our company to customize a 200-meter crawler water well drilling rig with diesel power generation/61kw.First, we will draw a rough model according to the customer's requirements, and then the designer will make a prototype based on the graphics. Now it has been made for the customer.
If you need a drill rig for various purposes such as drilling a well to obtain natural resources (water, oil, geothermal energy, etc.) building a foundation, drilling holes in a mine, taking samples from the ground.It is necessary to first determine the purpose of the drilling rig and what kind of terrain it will mainly operate on. Depending on the terrain, you can choose different types of drilling rigs: rotary drilling rigs, impact drilling rigs, down-the-hole drilling rigs, top hammer drilling rigs (with high hammer), etc.
Drilling rig is a complex machine, which consists of machines, units and mechanisms. A drilling rig is a mechanical device that drives drilling tools to drill underground to obtain physical geological data during exploration or development of mineral resources (including solid minerals, liquid minerals, gas minerals, etc.). Also called drilling machine. The main function is to drive the drilling tool to break the rock at the bottom of the hole, and to lower or lift the drilling tool in the hole. It can be used to drill rock cores, ore cores, cuttings, gaseous samples, liquid samples, etc.
The factory has become busy recently. As the number of customers gradually increases, so do the orders. However, we will still strictly control product quality so that customers can rest assured. The service quality will also increase accordingly.
1. What is the warranty of our machine?Our main machine enjoys a 1 year warranty(except for the hammer), during this time all accessories broken can be changed for a new one.And we provide videos for machine install and operation.2. What is your terms of packing?Generally, we use standard exported wooden case for LCL goods, and fixed well for FCL goods.
Zoucheng Jusheng Mining Machinery Co., Ltd. (Shandong) was established in 2 0 1 8. The company's annual sales are more than 1 5 million US dollars. Before the establishment of the company, we have 1 5 years of experience in equipment sales and service. As one of the excellent authorized agents of ZEGA brand mining machinery, we supply ZEGA brand mining rigs and air compressors to global customers. At present, JS Drill has reached long-term cooperation with customers in more than 5 0 countries around the world.
Visiting a construction site abroad1 Visiting processSafety training:Before entering the construction site, I received a safety training. The training content may include safety regulations of the construction site, emergency response measures, correct use of personal protective equipment, etc.Listen carefully to the safety training, comply with the safety regulations of the construction site, and ensure your own safety.2 Site tour:The site staff will lead the tour.
For the construction machinery industry, its development mainly has the following three characteristics:1. Industry development is closely related to national macroeconomic developmentFor the construction machinery industry, the development of the industry is closely related to the development of downstream demand markets. The development of downstream industries such as the real estate industry, infrastructure industry, power industry, and coal industry has a high impact on the growth of demand for various types of construction machinery and equipment. Relevance.
1. What is your terms of delivery?EXW, FOB, CFR, CIF.We have a very good cooperation in shipping logistics, and the price is low.Not only our product price is advantageous, but also our logistics price. 2. How about your delivery time?Generally, it will take 7-10 working days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. We have the goods in stock and they will be shipped from the factory within three days.
What is your terms of payment? T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
